Last Updated:
In winter, the correct location of the washing machine, distance from the wall, pipe connection and stability are very important. Know easy tips that will increase the performance of the machine and extend its life. There are some things among these which are generally common but people do not pay attention to them.
Washing Machine: Washing machine has become an essential home appliance in almost every Indian household. Be it fully automatic or semi-automatic, these machines clean heavy clothes in just a few minutes and make our daily tasks easier. However, despite long-term use, many people ignore some important things, which have a direct impact on the performance and life of the machine. Such as proper installation, proper distance between the machine and the wall, water pressure and proper plumbing.
Where and how to keep the washing machine: People often keep their washing machine wherever they have space. But this is a big mistake. According to experts, installing the machine at the wrong place can become a major reason for frequent breakdowns. The machine should always be kept at a distance of at least 4 to 6 inches from the back wall. This distance helps in reducing the vibration of the machine and avoids excessive pressure on the pipes, drainage hose and power cable.
If the machine is placed too close, the drum may hit the back surface during the spin cycle. This can increase noise and cause early wear of machine parts. Bent pipes can obstruct water flow, increasing the risk of leakage or motor damage. Therefore, by maintaining the correct distance, the machine can be protected from overheating.
Add StuffUnknownas
Preferred Source on Google
If there is stability then the machine will last for years: The washing machine should always be kept on a flat and strong surface. If the floor is uneven, the machine will vibrate more and may repeatedly hit the wall. In such a situation, using an anti-vibration pad or a strong stand can help in keeping the machine stable.
Do not tie the inlet and drainage pipes too tightly. These require gentle, natural movement during the washing cycle. When installing a new machine, run it empty to make sure it is not touching the wall. If the machine is hitting the wall, move it a little further to maintain the correct distance.
Take special care in winter: In cold weather, the water inside the pipes becomes thick, which puts more pressure on the motor. If the machine is equipped, run a hot water wash cycle once a week. Also, avoid putting excessive load on the machine, because in winter the machine has to work harder. After washing, allow the machine to dry thoroughly and keep the door slightly open, this will prevent moisture from accumulating and will also prevent odor.
A little care, longer life: Proper placement of the machine in winter and a little more care can extend its life by many years. By taking care of small things, you can not only keep the machine safe but also avoid expensive repair costs.





























